GW Instek PSM-6003 - Features; DC Output and Performance Specs

PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
 
2
1-2. Feature
1) An overall digitalization of programmable interface with high resolution
and accuracy.
2) High stability and low draft.
3) Excellent contrast and brightest VFD display.
4) Single output and double range.
5) Constant voltage/current operation.
6) Low ripple and noise.
7) The convenient and high efficiency operation of setting interface.
8) Wheel knob for Fine and Coarse adjustment and item selection.
9) Both front and rear panels are equipped with Remote voltage sensing.
10) The protection function of output ON/OFF and Over Voltage/Current/
Temperature protection.
11) Intelligent control fan (Vary with different output power).
12) Warning signal by the built-in Buzzer.
13) A programmed calibration procedure.
14) The brand new panel design and the 1/2 rack size reduction volume
design.
15) Save and Recall function of 100 groups setting and proceed together
with auto operation can achieve the purpose of auto test.
16) IEEE-488.2 and SCPI compatible command setting.
17) Correspond to many safety regulations.
PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
 
3
2. TECHNICAL SPECIFICATIONS
Specification PSM-2010 PSM-3004 PSM-6003
Low Range 0~ +8V / 0~20A 0~ +15V / 0~ 7A 0~ +30V / 0~6A
DC Output
High Range 0~ +20V/0~ 10A 0~ +30V/0~4A 0~ +60V/0~3.3A
Regulation
(% output +
offset)
Load regulation ≦ 0.01% + 2mV
Line regulation ≦ 0.01% +2mV
Constant
Voltage
Operation
Ripple &
Noise
<350uVrms/
3mVpp
<350uVrms/
2mVpp
<500uVrms/
3mVpp,
<1mVrms/
3mVpp
(Rating voltage
>50V)
Regulation
(% output +
offset)
Load regulation ≦ 0.01% + 250uA
Line regulation ≦ 0.01% +250uA
Constant
Current
Operation
Ripple &
Noise
2mArms
Resolution
Voltage 1mV 1mV 2mV
Programming
Current 1mA 0.5mA 0.5mA
Voltage 0.5mV 0.5mV 1mV
Readback
Current 1mA 0.1mA 0.5mA
Voltage 1mV
Front Panel
Current 1mA(<10A),10mA(≧10A)
OVP 10mV
OCP 10mA