H3C S5120-SI Series

About This Manual
Organization
H3C S5120-SI Series Ethernet Switches Installation Manual is organized as follows:
Chapter Contents
1 Product Overview
Briefly introduces the appearance, system description, as well as the
features and applications of the S5120-SI series switches.
2 Installation Preparations
Describes the requirements on installation site, the safety
recommendations before and during installation, and the required
tools.
3 Installing a Switch
Covers the procedures for installing the S5120-SI series switches,
ground wire connection, power module installation, interface module
installation, and so on.
4 Initial Power-On
Helps you get familiar with the basic knowledge of how to boot and
configure the S5120-SI series switches, including device startup,
power-on, and initialization of system files, and so on.
5 Loading Software
Introduces how to load Boot ROM and host software for an S5120-SI
series switch
6 Maintenance and
Troubleshooting
Introduces the problems that might occur during the installation and
the booting of an S5120-SI series switch and the related solution.
Appendix
Appendix A: Lightning protection of the S5120-SI series switches.
Appendix B: Provides Compliance and safety manual.
Conventions
The manual uses the following conventions:
GUI conventions
Convention Description
< > Button names are inside angle brackets. For example, click <OK>.
[ ]
Window names, menu items, data table and field names are inside
square brackets. For example, pop up the [New User] window.
/
Multi-level menus are separated by forward slashes. For example,
[File/Create/Folder].
Symbols
Convention Description
Means reader be extremely careful. Improper operation may cause
bodily injury.
Means reader be careful. Improper operation may cause data loss or
damage to equipment.
Means a complementary description.