H3C UniServer R4900 G3 User Manual

31
Figure 54 Array Configuration screen
3. On the screen as shown in Figure 55, navigate to a drive and press Insert or the space bar to
select it. Repeat this step to select more drives, and then press Enter.
Figure 55 Selecting the target drives
4. On the screen as shown in Figure 56, set the values for RAID Level, Logical Drive Name,
Stripe Size, Build Method, Size, and Acceleration Method. Then, select Done and press
Enter. For more information about the parameter description, see Table 4.

H3C UniServer R4900 G3 Specifications

General

Brand	H3C
Model	UniServer R4900 G3
Category	Server
Language	English