H3C UniServer R4900 G3 User Manual

8
Figure 9 Array Configuration screen
3. On the screen as shown in Figure 10, select the target drives. ([Enabled] following a drive
means that the drive has been selected.) Then, select Proceed to next Form and press
Enter.
Figure 10 Selecting the target drives
4. On the screen as shown in Figure 11, set the RAID level, select Proceed to next Form, and
then press Enter.

H3C UniServer R4900 G3 Specifications

General

Brand	H3C
Model	UniServer R4900 G3
Category	Server
Language	English