72
Figure 134 Citrix 7.1 GUI
NOTE:
If a storage controller has been installed on the server, install the driver for the storage controller as
shown in Figure 166 as a
best practice.
Installing a Ubuntu OS
The installation procedures are similar for different Ubuntu OS versions. This example installs
Ubuntu 14.10.
Restrictions and guidelines
Install the RAID controller driver package by following the procedures in the Readme packed with
the RAID controller driver package obtained from the Ubuntu website.
If the system displays that the driver name is in use when you remove the driver shipped with the
kernel by specifying modpobe –r driver name or rmmod driver name, it indicates that the hard drive
connected to the storage controller has the system disk where the controller is created. In this case,
do not remove the driver until you are prompted or reboot the server and then enter the BIOS Setup
Utility to delete the original logical disk, create a new disk and then continue installation.
Procedure
1. Enter the BIOS Setup Utility.
2. Select a boot option in the Save & Exit tab, and then press Enter. This example selects
UEFI:AMI Virtual CDROM0 1.00.
To Next Page
Loading...
Need help?
General
