82
Installing a network adapter
Overview
H3C servers support the following network adapter installation methods:
• Installing a Windows
• Installing a Linux
Installing a Windows network adapter
This section updates the driver of the CNA-10GE-2P-560F-B2 network adapter on a Windows
Server 2012 R2 OS. The device name might change after the driver is updated.
Checking network adapter version
1. Click the Windows button.
2. Select Control Panel > Hardware > Device Manager.
Figure 159 Accessing Device Manager
3. Right-click on Intel(R) 82599 10 Gigabit Dual Port Network Connection, and then select
Properties > Driver from the short-cut menu.
To Next Page
Loading...
