H3C UniServer R6900 G3 Operating System Installation Guide

11
Setting the BIOS boot mode
Setting the BIOS boot mode for H3C UniServer R4900/4700/2900/2700 G3
The Legacy and UEFI boot modes are available. The default mode is UEFI. For the BIOS boot
modes supported by different operating systems, see the operating system compatibility matrices for
the server.
To set the BIOS boot mode:
1. In the BIOS Setup Utility, click the Boot tab, select Boot mode select, and then press Enter.
Figure 13 Setting the BIOS boot mode
2. Select the Legacy or UEFI mode, and then press Enter.
Figure 14 Selecting a BIOS boot mode
3. Press F4 to save the configuration and reboot the server.
Setting the BIOS boot mode for H3C UniServer R6900 G3
The Legacy and UEFI boot modes are available. The default mode is UEFI. For the BIOS boot
modes supported by different operating systems, see the operating system compatibility matrixes for
the server.

H3C UniServer R6900 G3 Specifications

General

Brand	H3C
Model	UniServer R6900 G3
Category	Server
Language	English