87
Troubleshooting
SUSE11SP4 installation failure in Legacy or UEFI
mode
Symptom
In Legacy or UEFI mode, an error occurred during initrd creation if Intel NVMe SSD is used.
Figure 168 Failure to install SUSE11SP4
Solution
To resolve the issue:
1. Mount the image through a USB disk or create an ISO file and then mount the image through
KVM by following these steps:
a. Install SUSE11SP4 until the following page appears.
Figure 169 Installing SUSE11SP4
b. Press Ctrl+Alt+F2, and then execute the following commands:
#chroot /mnt
#mount /dev/cdrom /mnt
#cd /mnt
To Next Page
Loading...
Need help?
General
