97
OS installation takes a long time when the OS
image is mounted through an HDM shared
network interface
Symptom
OS installation takes a long time when the link speed is 1000 Mbps between an HDM network
interface and the peer interface.
Solution
To resolve the issue:
1. Change the transmission rate of the peer interface to 100 Mbps because the shared network
interface supports autonegotiation.
2. If the issue persists, contact H3C Support.
CAS E0306 OS installation failure
CAS E0306 OS installation is not supported because this version does not contain the Smartpqi
driver required by PMC SmartIOC 2100/SmartROC 3154.
To Next Page
Loading...
Need help?
General
