H3C WX1804H - Command and Hardware Compatibility; Configuration Restrictions and Guidelines; Configuration Task List

4
Hardware series
Model
ACL compatibility
WX5560H
WX5580H
Access controller modules
EWPXM1MAC0F
EWPXM1WCME0
EWPXM2WCMD0F
LSQM1WCMX20
LSQM1WCMX40
LSUM1WCME0
LSUM1WCMX20RT
LSUM1WCMX40RT
Yes
Command and hardware compatibility
The WX1800H series, WX2500H series, and WX3000H series access controllers do not support the
slot keyword or the slot-number argument.
Configuration restrictions and guidelines
Matching packets are forwarded through slow forwarding if an ACL rule contains match criteria or
has functions enabled in addition to the following match criteria and functions:
• Source and destination IP addresses.
• Source and destination ports.
• Transport layer protocol.
• ICMP or ICMPv6 message type, message code, and message name.
• VPN instance.
• Logging.
• Time range.
Slow forwarding requires packets to be sent to the control plane for forwarding entry calculation,
which affects the device forwarding performance.
Configuration task list
Tasks at a glance
(Required.) Configure ACLs according to the characteristics of the packets to be matched:
• Configuring a basic ACL
 Configuring an IPv4 basic ACL
 Configuring an IPv6 basic ACL
• Configuring an advanced ACL
 Configuring an IPv4 advanced ACL
 Configuring an IPv6 advanced ACL
• Configuring a Layer 2 ACL
• Configuring a WLAN client ACL
• Configuring a WLAN AP ACL
(Optional.) Copying an ACL