Haag-Streit 910 - Page 24

24
DEUTSCHENGLISH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS
PORTUGUÊS
SVENSKA
© HAAG‑STREIT AG, 3098 Koeniz, Switzerland ‑ HS‑Doc. No. 1500.7221019.04030 / 2024 – 04
50% PM 217 Hz
28 V/m
2400 – 2570 MHz
50% PM 217 Hz
9 V/m
5100 – 5800 MHz
50% PM 217 Hz
50% PM 217 Hz
28 V/m
2400 – 2570 MHz
50% PM 217 Hz
9 V/m
5100 – 5800 MHz
50% PM 217 Hz
GSM 1800/1900: max 2 W
CDMA 1900: max 2 W
DECT: max 2 W
LTE Band 1, 3, 4, 25: max 2 W
UMTS: max 2 W
Bluethooth: max 2 W
WLAN 802.11b/g/n: max 2 W
RFID 2450: max 2 W
LTE Band 7: max 2 W
WLAN 802.11 a/n: max 0.2 W
Interference may occur in the vicinity of equipment marked with the
following symbol:
Radiated fields in close proximity
IEC 61000-4-39
8 A/m
30 kHz
65 A/m
134.2 kHz
7.5 A/m
13.56 MHz
8 A/m
30 kHz
65 A/m
134.2 kHz **
7.5 A/m
13.56 MHz
* The ISM (industrial, scientific and medical) bands between 150 kHz and 80 MHz are: 6.765 – 6.795 MHz, 13.553 – 13.567 MHz, 26.957 – 27.283 MHz, 40.66 – 40.7
MHz. The amateur radio bands between 0.15 MHz and 80 MHz are: 1.8 MHz – 2 MHz, 3.5 – 4.0 MHz, 5.3 – 5.4 MHz, 7 – 7.3 MHz, 10.1 – 10.15 MHz, 14 – 14.2 MHz,
18.07 – 18.17 MHz, 21.0 – 21.4 MHz, 24.89 – 24.99 MHz, 28.0 – 29.7 MHz, 50.0 – 54.0 MHz.
** In the event of a severe 134.2 kHz interference, communication to the illumination head may be lost. It may be necessary to restart the device manually.
If the measured field strength in the location in which this product is used exceeds the applicable RF compliance level above, this product should be observed to verify nor-
mal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating this product.