Hoses
8.2.2
Metal hoses
Thermo Haake metal hoses (stainless steel insulated) offer
a particularly high degree of safety and are suitable for both
low and high temperatures.
The metal hoses are attached directly to the nozzle
A,
gas-
kets are not required.
!
The hoses must not be extremely bent
or
subjected
to mechanical strain!
These hoses are available in lengths of
0.5,
1
.O
and
1.5
me-
ters from Thermo Haake. Couplings for connecting two
hoses are also available if other lengths should be required
for a particular application.
The smallest opening inside the metal hoses is
10
mm. The
metal hoses are provided with coupling nuts
(MI6
x
1,
DIN
12
879,
part
2)
at either end. The counter piece for attaching
them complies to the left hand sketch.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...