EasyManua.ls Logo

Haake F6 - Plastic and Rubber Hoses

Haake F6
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hoses
unions on both ends. To be used from -90 to +350°C
50 cm long
100 cm long
150 cm long
Coupling to connect
2
hoses to each other
Description
Insulated
metal hoses
made from stainless steel with
M
16 x 1
PVC hoses
to be used only with water
8
mm
i.
0; per meter
12 mm i. 0; per meter
Viton hoses
for a temperature range of -60 to +200°C
8
mm i. 0; per meter
12 mm
i.
0;
per meter
Order-No.
8.2.1
Plastic and rubber hoses
Silicone hoses
for a temperature range of -30 to +220°C
(not to be used with any silicone oil, for example SIL or Synth 60)
8
mm
i.
0; per meter
12 mm
i.
0; per meter
Perbunan hoses
for a temperature range of -40 to +lOO°C
8
mm
i.
0;
per meter
12 mm
i.
0;
per meter
Foam rubber insulation
for
PVC,
Viton, Silicone und Perbunan
hoses
for hoses with
8
mm
i.
0; per meter
for hoses with 12 mm i. 0; per meter
If other hoses are used it must be ensured that the hoses se-
lected are fully suitable for the particular application,
i.e. that
they will not split, crack or become disengaged from their
nozzles.
082-0663
082-0664
082-01 72
082-01 73
806-0373
806-0374
A
B E
The hoses are connected using the hose fittings
B
supplied
for
8
or 12 mm
0
which are attached to the pump nozzle
A
with the coupling nut
E.
For the isolation
it
is highly recommended to use the foam
rubber isolation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents