Key
to
Symbols
1.2.1
Value
alteration
Selection of the digit which needs to be altered in any
temperature or time displays. Can
be
made left or right.
The selected digit is underlined,
e.g. change of set value:
SET-NEW:
+
lZ3.45"C
The one-degree digit has to
be
changed.
0x3
Change
of
the selected digit between
0
and
9,
e.g. change of set value:
SETPOINT: c123.45"C
The temperature has been altered by
3°C.
SET-NEW: +126.45"C
ENTER
key to confirm a selection,
e.g. change of set value:
SETPOINT
+126.450~
The set value alteration of plus 3°C
SET-NEW:
+
1
26.4s0C
has been confirmed and is in action.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...