Connecting
Up
11.4
Fuses on the unit
All units are equipped with automatic thermally-triggered
fuses.
If the fuse has triggered..
.
the fuse does not have to be exchanged
-
resetting suf-
fices;
a white marking is visible;
a certain cooling down time should be allowed (approx.
5
min) before the (dip) switch can be pressed again.
!
Do not use tools; do not use force. Both destroy the
fuse.
!
If the fuse should be triggered again after resetting,
the unit probably has a defect. In this case the unit
should be sent in for servicing.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...