Serial Interface
18.6
Correction
value
If
the desired correction value is set via the computer, this
means:
If
the interface connection
is
interrupted, the circulator
operates to the last correction value entered via the
interface.
After the mains supply current has been switched
off
and on, the circulator operates to the last value entered
via its keyboard and not the value given
by
the com-
puter.
18.7
Controlling
a
circulator
The interfaces can be controlled
by
the user either via a
BASIC
program or a higher programming language (under
DOS)
or via the Windows-Terminal (under Winwows
3.1
x).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...