Figure 1 Product overview
1 Power on or off 5 Alignment arrow
2 Backlight keys (+ and -) 6 Module
3 Sample cell holder with lid 7 Lamp compartment
4 Attachment for lanyard 8 Battery compartment
2.6 Product components
Refer to Figure 2 to make sure that all components have been received.
If any of these items are missing or damaged, contact the manufacturer
or a sales representative immediately.
Figure 2 2100Q and 2100Qis components
1 2100Q or 2100Qis turbidimeter 6 Silicone oil
2 Carrying case 7 20, 100 and 800 NTU StablCal
calibration standards
3 User manual and Quick
reference guide
8 AA alkaline batteries (pk/4)
4 Oiling cloth 9 StablCal 10 NTU verification
standard
5 1" sample cell (10 mL) with
cap (pk/6)
6 English
To Next Page
Loading...
