Hach DR/2400 - Section 2 General Instrument Operation; 2.1 Selecting a Language; 2.2 Instrument Setup Menu

General Instrument Operation
5940018Operation.fm Page 21
Section 2 General Instrument Operation
2.1 Selecting a Language
2.2 Instrument Setup Menu
2.2.1 Setting the Time and Date
1. Enter the Instrument Setup menu.
2. Touch the
Time or Date menu option.
3. Set the time using a 24-hour clock (0:00 to 23:59, where 0:00 is midnight and
12:00 is noon) or a 12-hour clock (1:00-12:59 with a selection for AM or PM).
4. Set the date. The date is displayed in the following format:
DD/MMM/YYYY. For example, 04-Feb-2001.
2.2.2 Setting Sound Preferences
To set sound preferences, enter the Instrument Setup menu. Touch Sound. Three
options will appear.
• Screen Touch — The instrument default is set to make a short beep every
time the screen is touched. To turn off the Screen Touch sound, uncheck the
Screen Touch option.
• Reading Done — The instrument default is set to make a short beep every
time a reading is complete. To turn off the Reading Done sound, uncheck the
Reading Done option.
• Timer — To change the length of the timer sound touch Short or Long. Long
beeps are better for noisy environments.
Touch
OK to accept the settings and return to the Instrument Setup menu.
1. With the instrument off, press the
Power key and hold it down
until the language selection screen appears.
2. Select a language and touch
OK. The menu screens will now
appear in the chosen language.
The Instrument Setup menu can be reached from the Main Menu by
selecting
Instrument Setup. From reading mode, select Options first.