43
Standard Operations
Enter the Name
Check the working procedure in advance to determine whether this
point needs to be changed.
1. Highlight the line containing Name and press
EDIT. Use the
alphanumeric keypad to enter the name indicated in the
working procedure.
2. Press
OK to confirm.
Enter the Version
1. Activate the line containing Version and press
EDIT. Use the
alphanumeric keypad to enter the name indicated in the
working procedure.
2. Press
OK to confirm.
Enter the Measurement Process
For detailed information on entering the measurement process, see
section B.1 on page 91.
Check the working procedure in advance to determine whether this
point needs to be changed.
1. Activate the Measurement Process line in the data overview
and press
EDIT.
2. Press
EDIT, select the sequence to be edited and press
DELETE.
3. Press
NEW and use the alphanumeric keypad to enter the
process indicated in the working procedure.
Enter the Formula, Concentration Units, Designation,
Measuring Ranges
For detailed information on entering a Formula, see section B.2 on
page 93.
Check the working procedure in advance to determine whether this
point needs to be changed.
1. Activate the Formula line in the data overview and press
EDIT.
2. Select the formula to be edited, press
EDIT and use the
alphanumeric keypad to enter the data specified in the working
procedure (for C1=, C2=, units, name, measuring range limits,
etc.).
To Next Page
Loading...
