To Next Page
K
Karl JohnsonSep 13, 2025
What causes 'Error Sipper?' on Hach DR 5000 Laboratory Equipment?
- JJoseph TuckerSep 13, 2025
The 'Error Sipper?' message can be caused by a kink in the tube or peristaltic pump failure. Check the tube connections.
What causes 'Error Sipper?' on Hach DR 5000 Laboratory Equipment?
The 'Error Sipper?' message can be caused by a kink in the tube or peristaltic pump failure. Check the tube connections.
General| Brand | Hach |
|---|---|
| Model | DR 5000 |
| Category | Laboratory Equipment |
| Language | English |
Details about the instrument's operational capabilities like mode, lamp, wavelength, accuracy, etc.
Information on the instrument's dimensions, weight, and operating/storage conditions.
Covers mains connection, interfaces, water resistance, and safety class of the instrument.
Crucial safety guidelines, hazard warnings, and precautionary labels for instrument operation.
A general introduction to the DR 5000 Spectrophotometer, its capabilities, and application modes.
Instructions for unpacking the DR 5000 Spectrophotometer and its included accessories.
Details on USB connections, cell compartment, Multi Cell Holder, and optional adapters.
Illustrates the optical path of the light beam within the DR 5000 Spectrophotometer.
Step-by-step guide on how to correctly turn the instrument on and off.
Instructions for selecting the preferred language and understanding the self-check procedure.
Introduces touch screen usage, alphanumeric keypad, and the main menu.
Guides users through configuring instrument parameters like Operator ID, Sample ID, Date/Time, and Passwords.
Instructions for storing, recalling, sending, and deleting measurement data from the Data Log and scans.
How to select, configure, and use the instrument's pre-programmed analytical methods.
Details on using barcode-driven tests, including setup, updates, and software upgrades.
Guides on creating, programming, and managing custom analysis methods, including favorites.
Advanced method for defining custom measurement processes, sequences, and formulas.
Procedures for performing absorbance, concentration, and transmittance measurements at a single wavelength.
How to conduct measurements at multiple wavelengths and process the results.
Steps for recording and analyzing absorbance/transmittance spectra over a wavelength range.
Procedures for collecting and analyzing data over a specified period, including navigation.
Accessing instrument information and performing various performance and optical checks.
Guidelines for cleaning the spectrophotometer, its display, and sample cells.
Detailed instructions for replacing the tungsten and deuterium lamps safely.
Steps for replacing fuses to maintain electrical circuit protection against over-current conditions.
Procedures for inspecting and replacing the instrument's air filter pad.
Lists conditions and exclusions that are not covered by the product warranty.
Defines the exclusive remedies available for warranty breaches and liability limitations.
