Hach Flo-Dar - Page 9

Figure 2 Instrument components
1 Flo-Dar sensor 4 Surcharge velocity sensor (SVS) (optional)
2 Extended range sensor (optional) 5 Flo-Dar connector and SVS connector
3 Bubble level 6 Flo-Dar with bare-wire and SVS with bare-wire
1
Figure 3 Wall mount hardware
1 Wall mount bracket 7 Standard frame
2 Spacer, 12-inch 8 Spacer, 2¼-inch
3 Anchor ,
3
/
8
x 2¼ in. (4x) 9 Adjustable wall bracket
4 Anchor washer (6x) 10 Clamp bolts, ¼-20 x 1 in. (10x)
5 Anchor nut,
3
/
8
-16 (6x) 11 Clamp half, not threaded (2x)
6 Frame for extended range sensor (optional) 12 Clamp half, threaded (2x)
1
Bare-wire is an alternative to the connector.
English 9