Specifications Details
Dissolved oxygen accuracy ±0.1 mg/L for concentrations less than 8 mg/L
±0.2 mg/L for concentrations more than 8 mg/L
% saturation resolution 0.1%
Stabilization time T90% at 10 seconds (when the solution is stirred)
Temperature resolution 0.1 °C (0.18 °F)
Temperature accuracy ±0.3 °C (±0.54 °F)
Pressure resolution 1 mbar (1 hPa)
Pressure accuracy ±0.8%
Operating temperature 0 to 50 °C (32 to 122 °F)
Storage temperature 0 to 40 °C (32 to 104 °F)
Minimum immersion depth 25 mm (0.98 in.)
Dimensions (standard) Diameter: 29 mm (1.14 in.)
Length: 191 mm (7.52 in.)
Cable length: LDO10101: 1 m (3.28 ft); LDO10103: 3 m (9.84 ft)
Dimensions (rugged) Diameter: 46 mm (1.8 in.)
Length: 223 mm (8.7 in.)
Cable length: LDO10105: 5 m (16.4 ft); LDO10110: 10 m (32.8 ft);
LDO10115: 15 m (49.2 ft); LDO10130: 30 m (98.4 ft)
Cable connection M12 digital output and connector
Warranty 3 years on the probe, 1 year on the sensor cap. This warranty covers
manufacturing defects, but not improper use or wear.
Certifications CE, FCC/ISED
Section 3 Safety information
3.1 Intended use
The Intellical probes are intended for use by individuals who measure water quality parameters in the
laboratory or in the field. The Intellical probes do not treat or alter water.
3.2 Use of hazard information
D A N G E R
Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or
serious injury.
W A R N I N G
Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death
or serious injury.
C A U T I O N
Indicates a potentially hazardous situation that may result in minor or moderate injury.
4 English
To Next Page
Loading...
