1—28
Bromine, Total, HR, continued
1.Fill a 1-cm/10-mL
sample cell with sample.
Cap. This is the blank.
Note:
Samples must be
analyzed immediately and
cannot be preserved for later
analysis.
2.Press the POWER key to
turn the meter on.
The arrow should indicate
the high range channel (HR).
Note:
See page 2—4 for
information on selecting the
correct range channel.
3.Remove the meter cap.
Place the blank into the cell
holder, with the diamond
mark facing the back of the
cell holder. Cover the cell
with the cap.
Note:
Wipe excess liquid and
fingerprints from the sample
cells.
To Next Page
Loading...
