Table 4 Warning list (continued)
Warning Description Resolution
The device is not
calibrated.
The sensor has not been
calibrated.
Calibrate the sensor.
Calibration is in progress. A calibration was started but not
completed.
Return to calibration.
Section 9 Consumables and replacement parts
For SC4500 Controller parts and accessories, refer to the replacement parts and accessories section
of the SC4500 Controller documentation.
W A R N I N G
Personal injury hazard. Use of non-approved parts may cause personal injury, damage to the
instrument or equipment malfunction. The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Table 5 Consumables
Description Quantity Item no.
Electrolyte, 25 mL, dropper bottle each 09181=A=3600-xx
Table 6 Replacement parts
Description Quantity Item no.
Calibration cap each 09182=A=1200
Electrode each 09182=A=1000
Flow chamber, stainless steel each 09078=A=2000
Membranes 4 09185=A=3500
Sensor body, includes:
Holding nut for the electrode, and electrolyte filling screw and filling
washer
each 09078=C=1010
Electrolyte filling screw each 09078=C=1030
Electrolyte filling washer each 09078=C=1020
Polymetron 2582sc Dissolved Oxygen Analyzer with no controller,
Asia and the Americas
each 2582.97.1000
Polymetron 2582sc Dissolved Oxygen Analyzer with no controller,
Europe
each 2582.98.1000
SC4500 Controller each
Refer to the part
number on the
controller.
Ultrapure amperometry module for SC4500 Controller each LXZ525.98.D0009
English 27
To Next Page
Loading...
