Hach POLYMETRON 9135 - ALARM 3 (Alarm System); ALARM 4 (Timer)

Transmitter 9135 - pH/redox measurement
Page 46
ALARM 3 (Alarm system)
− Choice of a limit on the measure or alarm
system with alarm 3.
MODE : • No
• Limit
• Sys
− Manual or automatic acquit possible with the
alarm system.
ACCEPT : • Auto
• Manu
− Choice between relays normally open or closed.
RELAY : • NO
• NC
ALARM 4 (Timer)
− Choice between a limit on the measure or a
timer for the probe cleaning with alarm 4.
MODE : • No
• Limit
• Timer
− INTERV : interval between 2 cleaning cycles
in minutes.
− IMPUL. Nb : number of pulses during a cleaning
cycle.
− Ton : time when relay is activated, in
secondes.
− Toff : time when relay is desactivated, in
secondes.
− TmA : analog output hold time for the
analogue outputs in minutes.
MODE :
ACCEPT : Manu
RELAY : NO
ALARM 3
Select
MODE :
INTERV : 2440 mn
IMPUL. Nb : 1
Ton : 005 s
Toff : 005 s
TmA : 00 mn
ALARM 4
Select
Timer
Sys