Hach POLYMETRON 9135 - Appendix B: Spare Parts List

Transmiter 9135 – pH/redox measurement
Page B1
Appendix B : Spare parts list
Any other spare parts except those below in the table should be replaced in
the instrument.
Part number Description
09125=A=1001 9135 equipped CPU board
09135=A=1500 9135 complete pH module
09125=A=2000 9135 power supply (standard version)
09125=A=2020 9135 power supply (low voltage version)
09125=A=4000 Relay board (option)
09125=A=1101 RS485 board (option)
09125=A=2485 RS485 kit (JBUS/MODBUS manual + board)
09125=C=3000 Mounted transmitter housing
425=110=002 Shutter PG 11 for P.E
425=110=221 Cable gland PG11
425=130=002 Shutter PG 13,5 for P.E
425=135=222 Cable gland PG13,5
351=007=001 Strap FLEXPAC 7 PTS
621=083=062 French instruction manual
621=991=000 JBUS/MODBUS communication manual
08362=A=2000 pH electrode
359016,10110 pH electrode’s 3 m cable
359016,10120 pH electrode’s 10 m cable
359016,10122 pH electrode’s 20 m cable
09125=A=8010 Pt100/1000’s simulator connections cable
09135=A=8030 Low impedance pH’s simulator connections cable