RECOMMENDED CALIBRATION EQUIPMENT
1. Black container (dark bucket) To avoid reflections of the measurement beam on the base and
walls during calibration.
2. Container should hold at least 1L of sample
3. The probe must swirl inside the bucket and have a clearance of 2 inches from the side walls and
3 inches from the bottom of the container.
4. Gravimetric measurement of sample
KEYPAD FUNCTION:
1. Turning on the meter: Press and hold the ENTER ON key
2. Turning off the meter: Press and hold the CLEAR OFF key
3. To select desired function: Press the ENTER ON key
To Next Page
Loading...
Need help?
General
