Table 2 Sidebar menu icons
Icon Description
Login
Logs in or logs out an operator. To log in, select an operator ID and then push Login. To log out,
push Logout.
Note: When an operator is logged in, the Login icon changes to the icon selected for the operator ID (e.g., fish,
butterfly or soccer ball) and the text "Login" changes to the operator ID.
Sample ID
Selects the sample ID.
Calibration
Starts a calibration.
Verification
Starts a verification.
Link2SC
Compares process and laboratory measurements.
Data Log
Shows the reading log, calibration log, verification log and compare log. Refer to Show the
recorded data on page 18.
Setup
Configures the instrument settings. Refer to Configure the instrument settings on page 12.
Diagnostics
Shows the firmware information, instrument backup, instrument updates, signaling information and
factory service data.
Timer
Sets a timer.
Goes to the manufacturer's website for the latest software versions and user manual when the
instrument has a LAN connection.
Documents
Shows the user manual and video(s) for the instrument.
Startup
C A U T I O N
Personal injury hazard. Never remove covers from the instrument. This is a laser-based instrument and
the user risks injury if exposed to the laser.
English 11
To Next Page
Loading...
Need help?
General
