57
HDE 16.05.2022 732.22.110
10.1 Simple reset
A simple reset is required in the following cases:
• If the programming key card and clearing key card (master keys) have been lost.
After a simple reset, the allocated master keys are cleared and reallocation is required (LED
continuously flashing in green).
Continued use of the terminal is not possible until a restart with new master keys (
5.
Commissioning, page 44). The locking authorisations for the user keys are retained after a
simple reset.
Prerequisites:
A tool to actuate the reset button, such as a thin pen/pencil or
opened out paper clip
1. Press the reset button.
A brief acoustic signal is heard.
2. Press and hold the reset button until a long
acoustic signal is heard.
The lock on parametrisation with the MDU
110 mobile programming unit is disabled.
The LED flashes continuously in green.
3. Re-teaching master keys
(
5. Commissioning, page 44)
ins-src-732.22.110_EFL.book Seite 57 Montag, 16. Mai 2022 9:28 09
ins-src-732.22.110_EFL - Kopie.pdf 57 16.05.2022 10:20:14
To Next Page
Loading...
