Haier HLP21N Installation And User Manual

12
a
a Wash Basket Brace
•
Using two or more people, lift the washer o of the packing base and the
molded plastic support.
NOTE: It is possible for the plastic support, under the U bracket, to remain
attached to the bottom of the washer. Make sure it is removed with the foam
base.
b
a
a Plastic
Support
b Foam
Base
2. Inspect the washer, and remove any remnants of packaging, tape or printed
materials before using the washer.
3. Properly dispose of /recycle all packing material.
STEP 2 - ROUTE DRAIN HOSE (OPTIONAL)
The washer comes from the factory with the drain hose routed so that it extends
from the bottom, left-hand side of the washer. If you want the hose to extend from
the right-hand side of the washer for draining, you must reroute the hose.
1. Remove the hose clamp. Gently pull the drain hose back through the opening on
the left-hand side of the washer.
2. Insert the drain hose into the opening on the right-hand side of the washer and
gently extend the hose to its full length.

Haier HLP21N Specifications

General

Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Dimensions (WxDxH)	447 x 438 x 760 mm
Power requirements	120V, 60Hz
Door hinge	Up
Drum volume	28 L
Loading type	Top-load
Drum material	Stainless steel
Product color	White
Built-in display	No
Appliance placement	Freestanding
Drum capacity	- kg
Spin-drying class	-
Maximum spin speed	700 RPM
Number of washing programs	3
Package weight	51800 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	438 mm
Width	447 mm
Height	760 mm
Weight	43000 g