EasyManuals Logo

Haier HLP21N Installation And User Manual

Haier HLP21N
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
20
STEP 8 - COMPLETE INSTALLATION
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
1. Plug the washer into a grounded 3 prong outlet.
2. Check that water faucet is turned on.
3. Dispose of/recycle all packaging materials.
4. Check that the casters, if installed, are locked. See “Level
the Washer.”
5. Run a normal wash cycle using detergent to test and
clean the washer. See the ”Operating Instructions”
section.

Table of Contents

Other manuals for Haier HLP21N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier HLP21N and is the answer not in the manual?

Haier HLP21N Specifications

General IconGeneral
Water consumption per cycle- L
Energy consumption washing per cycle- kWh
Dimensions (WxDxH)447 x 438 x 760 mm
Power requirements120V, 60Hz
Door hingeUp
Drum volume28 L
Loading typeTop-load
Drum materialStainless steel
Product colorWhite
Built-in displayNo
Appliance placementFreestanding
Drum capacity- kg
Spin-drying class-
Maximum spin speed700 RPM
Number of washing programs3
Package weight51800 g
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth438 mm
Width447 mm
Height760 mm
Weight43000 g

Related product manuals