21
CONTROL PANEL AND FEATURES
CONTROL PANEL
HIGH
MEDIUM
LOW
HEAVY
QUICK WASH
NORMAL
WASH
RINSE
SPIN
STATUS
WATER
LEVEL
CYCLE
START
PAUSE
POWER
ON/OFF
WASH CYCLE BUTTON
•
Use this button to select the desired cycle for your wash load.
•
The standard default settings of each cycle will be displayed; the default
settings can be changed by using the Setting button - Water Level.
•
There are 3 cycles to choose from:
Heavy - Use this cycle for heavily soiled durable garments. This cycle can
also be used for towels, sports gear, children’s clothes, etc.
Normal - Use this cycle for normally soiled cottons and mixed fabric loads.
Quick Wash - Use this cycle to wash small, lightly soiled loads that are
needed in a hurry.
SETTING BUTTON
Water Level Button
•
Use this button to select an appropriate water level for your load. Small is the
lowest water level and Super is the highest.
CYCLE PROGRESS INDICATORS
•
When the washer is rst powered on, the Cycle Progress lights indicate the
stages of the selected cycle.
•
As a stage is completed, the light will turn o indicating that the next stage is
operating.
•
The entire wash cycle is complete when all of the lights turn o.
START/PAUSE BUTTON
•
Press this button to start a selected cycle or to pause an operating cycle.
NOTE: After starting the wash cycle, you must pause the operating cycle to
change the Water Level setting.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
