EN
9-Care and cleaning
25
CAUTION!
▶ Pump fi lter sealing has to be clean and unhurt. If the lid is not full tightened, water
can escape.
▶ The fi lter must be in place, or it may lead to leakage.
9. Clean carefully pump fi lter, e.g. using running
water (Fig 9-14).
10. After cleaning, reinstall the handle and tighten it
until it does not move. At this time, the handle is
in vertical state (Fig 9-15).
11. Close service fl ap
9-159-14
To Next Page
Loading...
Need help?
General