-5-
Front panel
30 30
1
3
2
1: Remote control sensor.
2: Indicator LED: RED STANDBY
3: Key board
Back side
Power On state
Power Off state
Power switch
1. Turn on the power switch on the side of the TV.
2. If the standby indicator is not lighted, the TV is on.
3. If the standby indicator is red, press (Standby-On) on
the side of TV or remote control.
Keyboard
1. SOURCE :
Display the input source menu.
2. MENU :
Press to show the on-screen menu.
3. VOL+/ VOL- :
Adjust sound level.
In Menu mode, press " VOL+" or "VOL-" to adjust the
item that you selected.
4. CH / CH :
In TV mode, press CH or CH to change the channel
up and down.
In MENU mode, press CH or CH to select items.
5. (POWER) :
Press this button to turn the unit ON from STANDBY
mode.
INSTALLATION
To Next Page
Loading...
Need help?
General
