2
Warning
Do not start or stop the equipment by switching the unit disconnect.
Switching the disconnect to operate the equipment can cause
electrical shock or re.
Caution
Do not attempt to repair equipment with wet hands.
Working on the equipment with wet hands can cause an electrical
shock.
Do not clean the air conditioner by spraying it with water. Washing
the unit with water can damage the equipment and cause electrical
shock.
Be sure to prevent electrical shocks by providing proper grounding
when repairing the equipment; especially in humid or wet places.
Turn o the power at the equipment disconnect and lock out while
cleaning the equipment.
The internal fan rotates at a high speed, and can cause injury.
Keep equipment level while removing it.
The water inside the unit can spill and damage property.
Be sure to check that the refrigeration section has cooled down
suciently before conducting repair work.
Working on the unit when the refrigerating section is hot can cause
burns.
Use brazing and welding equipment in well-ventilated places.
Using a welder in an enclosed room can cause oxygen deciency.
To Next Page
Loading...
Need help?
General
