5
1.3 Inspection after Repair
Warning
Check all power connections for tightness. Loose connections can
cause electrical shock or re.
Electrical wire insulation should be free of scratches, cracking and
gouging. Replace all conductors with non-damaged insulation
otherwise electric shock, heat generation or re may result.
Do not splice electrical wires and cabling. Power to this equipment
must be dedicated and not be shared with any other electrical load
or electric shock, excessive heat or re could result.
Caution
Check all wiring and component connections for proper connection.
Improper installation and connections can cause excessive heat
generation, re or an electrical shock.
Check support structure routinely for corrosion and soundness.
Weakened support structure can fail and cause the unit to fall
resulting in damage and injury.
Check all electrical grounds and repair if necessary. Improper
grounding can cause electrical shock.
Check all electrical conductor insulation. Make sure it is free of
cracks or scratches. Faulty insulation can cause electrical shock.
Be sure that indoor unit drain pans are empty before servicing
equipment.
To Next Page
Loading...
