151
Smart Power
7.13 Accessories
WARING
For installation purpose, be sure to use the parts supplied by the manufacturer or other prescribed parts.
The use of non-prescribed parts can cause serious accidents such as the unit falling, water leakage, electric
shock, or re.
• The following installation parts are furnished. Use them as required.
• Keep this Manual in a safe place and do not discard any other accessories until the installation work has been
completed.
1UH071N1ERG 1UH090N1ERG 1UH105N1ERG 1UH125P1ERG
1UH140P1ERG 1UH160P1ERG 1UH125P1ERK 1UH140P1ERK
No. Name of parts Quantity Descriptions Shape
1 Dred attachmen 1
Used to control entry into
dred mode
2 One-touch bush 2
For power supply cable and
connection cable installation
3
Free insulation
protection strip
1
For protecting the
Connecting pipe
4 Drain connections 4
For Connecting the drain
pipe
5 Instructions 1 Air conditioner operation
6 Damping rubber pad 4
Used to reduce vibration of
the unit
7 Cable tie 2
For xing the power cable
and connecting cable
No. Name Quantity Descriptions Shape
1
Free insulation
protection strip
1
For protecting the
Connecting pipe or
connection cable
2 Drain connections 3
For Connecting the drain
pipe
3 Instructions 1 Air conditioner operation
4 Dred attachment 1
Used to control entry into
dred mode
5 Cable tie 3
For xing the power cable
and connecting cable
6 Cable tie 4
For xing the power cable
and connecting cable
7 Reducer 1
Connecting the outdoor unit
and the connecting pipe
when welding
1UH200W1ERK 1UH250W1ERK
To Next Page
Loading...
Need help?
General
