- 73 -
It sets time by second for average speed. It is a special function for a fishing boat.
(※ Although you set a time to the menu, it is unavailable if the menu, No. 5(Smoothing ser is off.)
(☞ The default setting is incorrect every the country.)
1.8. LAT/LON Unit
It is to select the number of the unit for Lat/Lon.
(☞ The default setting is 4 unit.)
1.9. Receiving Port
It is to select Inter receiver Internal, External and AIS.
(☞ The default setting is AIS.)
2. Setup
It is available to set the menu or units for user’s visual confidence.
2.1. Unit
2.1.1. DIST/Speed
Select desired unit of measure for distance and speed. Choose from: nautical mile/knots (nm/kt),
kilometer/kilometers per hour(km/kmh), yard/knot(yd/kt).
cf) 1nm = 1.852km, 1kt /h= 1.852km/h, less than 1nm display in yard and over 1nm display in mile
( ☞ The default setting is Nm/Kt.)
2.1.2. Depth
Select desired unit of measure for depth of water. Choose from: meter(M), foot(ft), fathom(fm), Italian
Fathom(Ifm), Japanese fathom(Jfm).
cf) 1m = 3.281ft = 0.549fm = 0.609lfm = 0.660jfm
( ☞ The default setting is Meter.)
2.1.3. TEMP
Select desired unit of measure for temperature of water. Choose from: Celsius( ℃), or Fa h
cf) 1 ℃ = +32℉
2.2. Compass
2.2.1. BRG
To Next Page
Loading...
