- 77 -
Choose the position of Information window.
(☞ The default setting is Auto.)
2.4.5.6. Userdata
2.4.5.6.1. WPT
16 kinds of symbol and color. Choose the symbols and the colors.
2.4.5.6.1.1. Symbol Setup
In 16 kinds of the symbols, you can choose as many as you want, and those will show on the WPT
symbol window.
2.4.5.6.1.2. Color Setup
In 16 kinds of the colors, you can choose as many as you want, and those will show on the WPT color
window.
2.4.5.6.2. Track
2.4.5.6.2.1. Color Setup
In 16 kinds of the colors, you can choose as many as you want, and those will show on the track color
window.
2.4.5.6. Page mode
It is a select the page mode.
- Standard: Choosing Page and customizing is available.
- Flip: Showing the chosen pages in order.
(☞ The default setting is Standard.)
2.4.6. TD Setup
It sets Chain, Pair, ASF
3. Maintenance
It is necessary to check the system or the version for maintenance and demonstrate Smart7/8/10
serieswith the simulators
3.1. Program Version
It contains ID and the program version, and it has important information for maintenance and upgrade.
3.2. OS Version
It contains the version of OS, which is necessary for maintenance and upgrade
3.3. MAP Version
It contains the version of the chart, the datum and the number, which is necessary for maintenance
and upgrade
3.4. Simulator
To Next Page
Loading...
