Haiyang Smart7 User Manual

- 1 -
Important Notice
Manual
Handling
Keep this manual in a safe place where you can access it quickly.
The Global Positioning System (GPS) consists of a total 24 GPS satellites that orbit the earth,
enabling you to determine your position anywhere in the world, 24 hours a day, if you can receive
satellite signals. During actual navigation, carefully compare the position data with all available
navigation sources such as Loran C, Decca, other navigators, charts, visual navigation, and others. It
is your responsibility to make navigation judgments.
The Electronic Chart :
Only official authorized charts and notices to mariners contain all the information needed for the safety
of navigation and, as always remember, the user is responsible for their prudent use.
Pictorials
This manual uses the following symbols for easy understanding safety instructions. Always follow
these instructions carefully.
WARNING
Always follow this safety instruction to prevent death or injury.
CAUTION
Follow this safety instruction to avoid possible injury or damage to your
property.
Symbol “△” is a CAUTION or WARNING label indicating the safety
instruction.
WARNING
This symbol is an Electrical Shock WARNING label.
Symbol is an instruction that you must not violate.
(This symbol instructs NOT to disassemble the system components)
Symbol is an operation instruction that you must follow.
(This symbol shows the main power OFF instruction.)

Haiyang Smart7 Specifications

General

GPS	Yes
Waterproof	Yes
Display	Color LCD
Resolution	800 x 480 pixels
Frequency	50/200 kHz
Power Output	500W RMS
Display Size	7 inches
Depth Capability	1000 feet
Waterproof Rating	IPX7

Summary

Important Notices

Electronic Chart Usage

Official charts and notices are vital for navigation safety.

Safety Pictorial Symbols

Understand and follow safety instructions indicated by symbols.

Safety and Installation Cautions

System Operator Safety Warnings

Follow instructions to prevent death or personal injury.

Service Personnel Installation Cautions

Follow instructions to avoid injury and system malfunction.

Maintenance and Operation Guidelines

Maintenance Precautions for Personnel

Use safety precautions during internal inspection.

Operator Guidelines for System Performance

Observe notes to prevent system failure and ensure optimum condition.

Databar and Cursor Configuration

Databar Modes and Customization

Cursor Control and Information

Data Handling

Saving and Loading User Data

Manage user data like waypoints, routes, and tracks.

AIS System Operations

AIS Introduction and Definitions

Understand AIS basics and key terminology.

AIS Information Windows and Tracking

AIS Alarms and Display Settings

Chartplotter Functions

GOTO Functionality

Navigate to a destination using GOTO types.

Waypoint (WPT) Management

Create, edit, and manage waypoints.

Route Planning and Management

Create, edit, and navigate routes.

Track Recording and Display

Manage and view recorded tracks.

Correction Offset for Chart Position

GPS Antenna Installation

Optimal GPS Antenna Placement Guidelines

Follow instructions for best signal reception.