Need help?Do you have a question about the Hakko Electronics 702B and is the answer not in the manual?
General| Brand | Hakko Electronics |
|---|---|
| Model | 702B |
| Category | Soldering Gun |
| Language | English |
Covers operational safety, temperature, and pre-use checks.
Identifies and labels components of the main station unit.
Identifies and labels components of the soldering iron and desoldering gun.
Steps for setting up the soldering iron and holder.
Guide on plugging in, turning on, and setting temperature for soldering.
Steps for setting up the desoldering gun and connections.
Guide on setting temperature and performing desoldering.
Instructions on monitoring and maintaining the desoldering gun during use.
Procedure for replacing filters in the desoldering gun.
Addresses issues with solder not melting properly during desoldering.
Explains causes and solutions for reduced suction power.
Recommendations for maintaining the unit after use.
Steps for preparing the unit for SMD rework operations.
Guide on connecting and powering the unit for SMD rework.
Detailed procedure for desoldering QFP components.
Detailed procedure for soldering QFP components.
Provides temperature distribution data for various nozzles and air flow settings.
General procedures for cleaning and maintaining the desoldering gun.
Procedure for cleaning and replacing filters within the unit.
Steps for disassembling and cleaning the internal pump.
Instructions for recalibrating the unit after component changes.
Details on replacement soldering tips and their characteristics.
Lists replacement and optional parts specifically for the Hakko 809.
To Next Page