Hakko Electronics 942 - Packing List; Specifications

1
Control
card
Card chain
®
Heat resistant pad
Iron holder
Tip tray
Hakko 912
Soldering iron
Hakko 942
Soldering station
Power cord
1. PACKING LIST
Hakko 942 soldering station ........................... 1
Hakko 912 soldering iron ................................ 1
Power cord ...................................................... 1
Control card .................................................... 1
Heat resistant pad ........................................... 1
Iron holder .......................................................1
Tip tray ............................................................ 1
Cleaning sponge ............................................. 1
Instruction manual .......................................... 1
Card chain ....................................................... 1
Tips (not included)
2. SPECIFICATIONS
Power consumption
Temperature range
Temperature stability
● Hakko 942 soldering station
Power consumption
Tip to ground resistance
Tip to ground potential
Length, less cord
Weight, less cord
Length of cord
70 W (24 V)
< 2 Ω
< 2 mV
172 mm with 2.4D tip
30 g with 2.4D tip
1.2 m
● Hakko 912 soldering iron
Output
Dimensions
(l × w × h)
Weight
24 V
188 × 100 × 106 mm
2,500 g
● Station
NOTE:
The temperatures were measured using the Hakko 191
thermometer.
This product is protected against electrostatic discharge.
Specifications and design are subject to change without
notice.