Hama IR360MBT User Manual

7
7.2 First-time setup of the device with UNDOK
The rst time you switch on an UNDOK-enabled product
from Hama, or when you have set it to the factory settings,
it creates amicroaccess point –aseparate WiFi network
that you can connect to with your tablet or smartphone.
Note
• The UNDOK app uses the language selected in your
smartphone’ssystem.
Open/unsecured network
Note
• We recommend against establishing unsecured
connections and advise you to always protect your
network against unauthorised access.
• If your desired network has no safeguards, it is
enough to select the network from the list and
conrm your selection. The radio then promptly
connects to the access point.
Wired connection (LAN)
• Connect the radio to the router using aLAN cable. This
method of direct connection is the most reliable and
least susceptible to interference.
• To nd out how to determine whether the DHCP server is
active, please consult the operating instructions of your
router or access point.
7.2.1 Procedure for iOS users
• Open the UNDOK app on your iPhone or iPad.
• Tapthe Set up audio system menu item.
• Make surethat the radio or speaker is in SETUP mode. -
If the device is not in SETUP mode, press and hold the
SETUP/PRESET button [11] for approximately 5seconds.
Conrm the query with Next.
• The UNDOK app now prompts you to connect to the
product’sWiFi network using the iPhone/iPad settings
–todoso, switch to the system settings on your iPhone
and select the WiFi network (for example, Setup Hama
DIR3120LED). Then return to the UNDOK app and tap
Next.
• Now choose aname for the radio (for example, Oce
DIR3120) and conrm your entry with Next.
• The various network conguration options arethen
offered to you (whereapplicable, WiFi, WPS and
Ethernet). Tapthe desired method; the UNDOK app
switches to the next window.
• Depending on the selected method, you can now select
and congurethe desired WiFi network, set up aWPS
connection or set up the connection using aLAN cable.
• Finally,the radio connects to the network; by tapping
Start using my audio system,you will be able to use
the device in the UNDOK app.
• The network connection LED indicator (7) is now
constantly lit.
7.2.2 Procedure for Android users
• Open the UNDOK app on your tablet or smartphone.
• Tapthe Set up audio system menu item.
• Make surethat the radio or speaker is in SETUP mode.
If the device is not in SETUP mode, press and hold the
SETUP/PRESET button [11] for approximately 5seconds.
Conrm the query with Next.
• On the following page, you will nd alist of all
available WiFi networks as well as the suggested
audio systems; the Hama product (for example, Setup
Hama DIR3120LED) should be listed here. Tapthe
corresponding WiFi network.
• Now choose aname for the radio (for example, Oce
DIR3120) and conrm your entry with Next.
• The various network conguration options arethen
offered to you (whereapplicable, WiFi, WPS and
Ethernet). Tapthe desired method; the UNDOK app
switches to the next window.
• Depending on the selected method, you can now select
and congurethe desired WiFi network, set up aWPS
connection or set up the connection using aLAN cable.
• Finally,the radio connects to the network; by tapping
“Start using my audio system”, you willbeable to use
the device in the UNDOK app.
• The network connection LED indicator (7) is now
constantly lit.

Hama IR360MBT Specifications

General

Brand	Hama
Model	IR360MBT
Category	Radio
Language	English