Hama IR360MBT User Manual

18
14. Equaliser
The equaliser allows you to adjust the sound of the radio
to suit your preferences by amplifying or reducing the
amount of bass or treble in the audio .
Youcan choose from precongured proles, adjusted to
suit avariety of music genres, or create your own custom
prole.
• To change the equaliser settings, proceed as follows:
UNDOK App
Settings

Equalizer
• To create your own equaliser prole, choose the option
My EQ settings.
• This takes you to the settings for Bass, Trebleand
Loudness (volume amplication).
Note
• Often the Pre-Shared Keyisprinted on the back or
bottom of the router or access point.
• When entering the key,take notice of capitalisation.
15. Display settings
Hereyou can nd all the most important information about
all network connections currently used or congured on
the radio, such as: MACaddress, WLAN region, DHCP
active/disabled, SSID, IP address, subnet mask, gateway
address, DNS (primary and secondary), etc.
UNDOK App

Settings
15.1 Time settings
To access the time settings, proceed as follows:
UNDOK App
Settings

Set date &time
15.2 Language
The UNDOK app uses the language selected in your
smartphone’ssystem.
15.3 Factory settings
To reset the radio to the factory default settings, proceed
as follows.
Procedureonthe device:
Remove the power supply unit from the device.
Press and hold [M], and at the same time reconnect the
power supply unit. Then release [M]. The device now
restarts.
Resetting via the UNDOK app:
UNDOK App
Settings

Factory reset
• Conrm the next prompt with YES to reset the radio to
the factory default settings.
All settings made previously aredeleted.
Note
• Resetting to the factory default settings can solve
some problems and malfunctions.
• However,all settings made previously,such as custom
equaliser presets, favourites, and network proles, are
permanently deleted.

Hama IR360MBT Specifications

General

Brand	Hama
Model	IR360MBT
Category	Radio
Language	English