Hama IR360MBT - Auxiliary Input

17
12. Auxiliary Input
Youcan use the analogue audio input (AUX IN socket) to
connect mobile devices (for example, smartphone, tablet
PC, MP3 player,etc.) to the radio and play your audio les
using the radio.
• Repeatedly press [M]/[MODE]toactivate Auxiliary
Input (Aux in) mode on the speaker:
[ ]
Alternatively,press [AUX]onthe remote control to switch
directly to this operating mode.
• The AUX-In connection LED indicator (8) begins to ash.
• Connect your mobile device to the audio input (the AUX
IN socket) of the radio using a3.5-mm audio cable (jack
cable).
• The AUX-In connection LED indicator (8) is now
constantly lit.
• Start and control audio playback using the controls of the
connected terminal device.
Alternatively,you may perform setup with the UNDOK app.
UNDOK App
source

Auxiliary Input
13. Snooze
The radio has atimer function, which switches the radio to
standby mode after apre-dened length of time.
UNDOK App
Settings

Sleep Timer

desired time (15/30/45...)

OK
• Once the pre-set interval has elapsed, the radio switches
to standby mode.
• Press [PLAY/PAUSE] on the device or the remote control
to switch radio back on.
• Alternatively,you can switch the radio back on using the
UNDOK app (see Undok yer).
• Youmay change or deactivate apreviously set interval at
any time using the UNDOK app:
UNDOK App
Settings

Sleep Timer

desired time "Off"

OK