8
7.3 General control of adevice or group
To control acongured device, tap the relevant device/
group in the selection list on the UNDOK home page.
This takes you to the product’splayback screen; the
following functions areavailable:
1
2
3
4
5
7
8
10
11
9
1 Open the home page (all audio systems)
2
Selection of the various sources (dependent on
the active device/the devices in the group)
3
Open the favourites list (storing and selecting
favourites)
4 Sharecurrent station
5 Volume control for the group or active device
6
Advanced settings (equaliser/date/factory
settings, depending on the device)
7 Switch device/group to standby
8 Browse current source
9 Playback screen of the device/group
10
Depending on the source, function buttons are
shown here(play,next, previous)
11
Herethe volume settings of all devices in a
multi-room group can be adjusted individually.
To Next Page
Loading...
