10
7.5.2 Creating agroup
• If you wish to create anew group, navigate to the
overview of all devices present in the network.
• Select Create new group.
• Choose the clients to belong to the new group.
• Enter aname for the new group and conrm with [OK].
7.5.3 Add clients to agroup
• If the selected device is already the master,you can add
(further) clients using the
icon in the radio overview.
• On selecting this menu item, alist of the devices in
the network is displayed. Devices with atick mark are
already clients of the group.
• Only devices without atick mark can be added as clients
to the group.
7.5.4 Leave group
• Remove the tick mark of aclient to remove it from the
current group.
7.5.5 Delete group
• If you want to delete acomplete group, select “Congure
group”.
• Then press “Delete group”.
7.6 Settings and standby
To open the settings of the radio, press the Settings icon
and then Settings.
To put the radio into standby mode using the app, press
the Standby symbol
.
In the settings, you can rename the radio, reset it to factory
settings, congurethe equaliser,activate logging, and set
the sleep timer and language.
8. Modes
Select amongst the available operating modes by
repeatedly pressing [M].
To Next Page
Loading...
Need help?
General
