Need help?Do you have a question about the Hameg HM 203-6 and is the answer not in the manual?
General| Type | Oscilloscope |
|---|---|
| Bandwidth | 20 MHz |
| Channels | 2 |
| Max Input Voltage | 400 V (DC + AC peak) |
| Time Base | 0.2 μs/div to 0.5 s/div |
| Input Impedance | 1 MΩ |
| Trigger Modes | Auto, Single |
| Display | CRT |
| Power Supply | 50/60 Hz |
Key technical data including operating modes, vertical deflection, timebase, and horizontal deflection.
Introduces the built-in component tester for device diagnostics.
Step-by-step guide for initial power-up, control setup, and trace adjustments.
Automatic vs. Normal triggering, slope selection, and trigger threshold.
Trigger coupling options (AC, DC, HF, LF) and video signal triggering.
Using external triggers and the holdoff-time adjustment for complex signals.
Procedures for checking timebase accuracy, linearity, and sweep speed.
How to use the component tester and interpret displayed test patterns for various components.
To Next Page
