11
Planer-Thicknesser
A3-26 / A3-31 / A3-41
2.7 Personal protective equipment
When working on or with the machine, the following
must be strictly observed:
Protective clothes
Sturdy, tight-fitting clothing (tear-resistant, no wide sleeves).
Persons with long hair who are not wearing a hairnet are not permitted to work on or with the machine!
It is prohibited to wear gloves while working on or with the machine!
When working on or with the machine, the following must always be worn by personnel:
Protective footwear
that protect the feet from heavy falling objects and prevent sliding on slippery floors
Hearing protection
To protect against loss of hearing
2.8 Machine hazards
The machine has undergone a hazard analysis. The
design and construction of the machine are based on the
results of this analysis and correspond to state-of-the-art
technology.
The machine is considered operationally safe when used
properly.
Nevertheless, there are some remaining risks that must be
considered.
The machine runs with high electrical voltage.
Warning! Danger! Electric current:
Electrical energy can cause serious bodily injury. Damaged insulation materials or defective individual
components can cause a life-threatening electrical shock.
• Before carrying out any maintenance, cleaning and
repair work, switch off the machine and ensure that it
can not be accidentally switched on again.
• When carrying out any work on the electrical
equipment, ensure that the voltage supply is
completely isolated.
• Do not remove any safety devices or alter them to
prevent them from functioning correctly.
Safety
To Next Page
Loading...
Need help?
General
