Need help?Do you have a question about the Hammer A3-31 and is the answer not in the manual?
General| Max. planing width | 310 mm |
|---|---|
| Total length of tables | 1400 mm |
| Max. depth of cut | 4 mm |
| Tersa cutterblock with reversible blades | Yes |
| Number of blades | 3 |
| Max. planing depth | 4 mm |
| Planer knife length | 310 mm |
| Motor power | 3 kW |
| Frequency | 50 Hz |
| Planing fence tiltable | 90°–45° |
Explains the meaning of safety symbols used throughout the manual.
Guidance on proper manual usage, maintenance, and accessibility.
Details on manufacturer liability, warranty terms, and copyright.
Information on ordering genuine spare parts and environmentally sound disposal.
Defines the machine's intended purpose and stresses the importance of following the manual.
Outlines operator duties, required personnel qualifications, and work safety.
Specifies required PPE and identifies potential machine hazards like electric current.
Highlights additional risks associated with machine operation, including injury and hearing damage.
Provides detailed measurements, weights, and packaging dimensions for all models.
Specifies mains voltage, safeguarding, and triggering characteristics.
Details motor voltage, frequency, power ratings, and system of protection.
Presents acoustic power and emission values for surface and thickness planing.
Lists specifications for the cutterblock, planer unit, thicknesser unit, and drilling unit.
Visual overview of the machine's main components and their numbering.
Details various optional accessories like digital clocks, drilling chucks, and table extensions.
Explains the location and specifications displayed on the machine's data plate.
Identifies and describes safety break switches and the bridge guard.
Details the function of various control levers, buttons, scales, and switches.
Crucial safety measures to follow during machine transport to prevent injury and damage.
Guidelines for moving the machine using various devices like forklifts or rolling carriages.
Procedures for transport inspection, packaging, and optimal storage conditions.
Essential safety precautions for machine assembly and installation to prevent injury.
Specifies environmental conditions and space requirements for proper machine setup.
Instructions for connecting the machine to a dust extractor for efficient chip removal.
Guidance on safely connecting the machine to the power supply, including motor types.
Safety precautions before performing any adjustments or setup work on the machine.
Procedure for setting the desired depth of cut using the adjustment wheel and scale.
Instructions for setting the planer table to achieve precise joints.
Details on adjusting the planer fence angle and its sliding position.
Guide to adjusting the thicknessing height using the system handwheel and scale.
Critical safety measures to observe before, during, and after machine operation.
Procedures for safely switching the machine on and off, including emergency stop.
Detailed steps for surface planing, including workpiece handling and safety.
Instructions for thickness planing, including workpiece dimensions and techniques.
Guidance on drilling operations, including work position, dimensions, and authorized techniques.
Essential safety precautions for performing maintenance and service work on the machine.
Schedule outlining daily, monthly, and periodic maintenance tasks for machine components.
Step-by-step guides for common maintenance tasks like cleaning guards and rollers.
Immediate actions upon discovering a fault and safety measures before restarting.
Table listing common faults, their potential causes, and recommended repair procedures.
Instructions for checking, resharpening, reversing, or replacing planer knives.
Procedure for correcting the angle of the combination fence for accurate planing.
To Next Page
